NrSubMeas

SCPI Commands :

CONFigure:NRSub:MEASurement<Instance>:BAND
CONFigure:NRSub:MEASurement<Instance>:NCARrier
class NrSubMeasCls[source]

NrSubMeas commands group definition. 196 total commands, 9 Subgroups, 2 group commands

get_band() → Band[source]
# SCPI: CONFigure:NRSub:MEASurement<Instance>:BAND
value: enums.Band = driver.configure.nrSubMeas.get_band()

Selects the operating band (OB) . The allowed input range depends on the duplex mode (FDD or TDD) .

return:

band: FDD: OB1 | OB2 | OB3 | OB5 | OB7 | OB8 | OB12 | OB13 | OB14 | OB18 | OB20 | OB24 | OB25 | OB26 | OB28 | OB30 | OB65 | OB66 | OB70 | OB71 | OB74 | OB80 | … | OB86 | OB89 | OB91 | … | OB95 | OB97 | OB98 | OB99 | OB105 | OB255 | OB256 TDD: OB34 | OB38 | … | OB41 | OB46 | OB47 | OB48 | OB50 | OB51 | OB53 | OB77 | … | OB84 | OB86 | OB89 | OB90 | OB95 | OB97 | OB98 | OB99

get_ncarrier() → int[source]
# SCPI: CONFigure:NRSub:MEASurement<Instance>:NCARrier
value: int = driver.configure.nrSubMeas.get_ncarrier()

Configures the number of contiguously aggregated UL carriers in the measured signal.

return:

number: numeric Range: 1 to 2

set_band(band: Band) → None[source]
# SCPI: CONFigure:NRSub:MEASurement<Instance>:BAND
driver.configure.nrSubMeas.set_band(band = enums.Band.OB1)

Selects the operating band (OB) . The allowed input range depends on the duplex mode (FDD or TDD) .

param band:

FDD: OB1 | OB2 | OB3 | OB5 | OB7 | OB8 | OB12 | OB13 | OB14 | OB18 | OB20 | OB24 | OB25 | OB26 | OB28 | OB30 | OB65 | OB66 | OB70 | OB71 | OB74 | OB80 | … | OB86 | OB89 | OB91 | … | OB95 | OB97 | OB98 | OB99 | OB105 | OB255 | OB256 TDD: OB34 | OB38 | … | OB41 | OB46 | OB47 | OB48 | OB50 | OB51 | OB53 | OB77 | … | OB84 | OB86 | OB89 | OB90 | OB95 | OB97 | OB98 | OB99

set_ncarrier(number: int) → None[source]
# SCPI: CONFigure:NRSub:MEASurement<Instance>:NCARrier
driver.configure.nrSubMeas.set_ncarrier(number = 1)

Configures the number of contiguously aggregated UL carriers in the measured signal.

param number:

numeric Range: 1 to 2

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.configure.nrSubMeas.clone()

Subgroups