Setup

SCPI Command :

CONFigure:NRSub:MEASurement<Instance>:LIST:SEGMent<no>:SETup
class SetupCls[source]

Setup commands group definition. 1 total commands, 0 Subgroups, 1 group commands

class SetupStruct[source]

Structure for setting input parameters. Contains optional setting parameters. Fields:

  • Segment_Length: int: integer Number of subframes in the segment Range: 1 to 1000

  • Level: float: numeric Expected nominal power in the segment. The range can be calculated as follows: Range (Expected Nominal Power) = Range (Input Power) + External Attenuation - User Margin The input power range is stated in the specifications document. Unit: dBm

  • Duplex_Mode: enums.DuplexModeB: FDD | TDD Duplex mode used in the segment

  • Band: enums.Band: FDD: OB1 | OB2 | OB3 | OB5 | OB7 | OB8 | OB12 | OB13 | OB14 | OB18 | OB20 | OB24 | OB25 | OB26 | OB28 | OB30 | OB65 | OB66 | OB70 | OB71 | OB74 | OB80 | … | OB86 | OB89 | OB91 | … | OB95 | OB97 | OB98 | OB99 | OB105 | OB255 | OB256 TDD: OB34 | OB38 | … | OB41 | OB46 | OB47 | OB48 | OB50 | OB51 | OB53 | OB77 | … | OB84 | OB86 | OB89 | OB90 | OB95 | OB97 | OB98 | OB99 Operating band used in the segment

  • Retrigger_Flag: enums.RetriggerFlag: OFF | ON | IFPower | IFPNarrowband Specifies whether the measurement waits for a trigger event before measuring the segment, or not. The retrigger flag is ignored for trigger mode ONCE and evaluated for trigger mode SEGMent, see [CMDLINKRESOLVED Trigger.NrSubMeas.ListPy#Mode CMDLINKRESOLVED]. OFF Measure the segment without retrigger. For the first segment, the value OFF is interpreted as ON. ON Wait for a trigger event from the trigger source configured via [CMDLINKRESOLVED Trigger.NrSubMeas.MultiEval#Source CMDLINKRESOLVED]. IFPower Wait for a trigger event from the trigger source ‘IF Power’. The trigger evaluation bandwidth is 160 MHz. IFPNarrowband Wait for a trigger event from the trigger source ‘IF Power’. The trigger evaluation bandwidth is configured via [CMDLINKRESOLVED Trigger.NrSubMeas.ListPy#Nbandwidth CMDLINKRESOLVED].

  • Evaluat_Offset: int: integer Number of subframes at the beginning of the segment that are not evaluated Range: 0 to 1000

  • Network_Sig_Val: enums.NetworkSigVal: Optional setting parameter. NS01 | NS02 | NS03 | NS04 | NS05 | NS06 | NS07 | NS08 | NS09 | NS10 | NS11 | NS12 | NS13 | NS14 | NS15 | NS16 | NS17 | NS18 | NS19 | NS20 | NS21 | NS22 | NS23 | NS24 | NS25 | NS26 | NS27 | NS28 | NS29 | NS30 | NS31 | NS32 | NS35 Network signaled value to be used for the segment

get(sEGMent=SEGMent.Default) → SetupStruct[source]
# SCPI: CONFigure:NRSub:MEASurement<Instance>:LIST:SEGMent<no>:SETup
value: SetupStruct = driver.configure.nrSubMeas.listPy.segment.setup.get(sEGMent = repcap.SEGMent.Default)

Defines the length and analyzer settings of segment <no>. For carrier-specific settings, there are additional commands. This command and the other segment configuration commands must be sent for all segments to be measured (method RsCmwNrFr1Meas.Configure.NrSubMeas.MultiEval.ListPy.Lrange.set) .

param sEGMent:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Segment’)

return:

structure: for return value, see the help for SetupStruct structure arguments.

set(structure: SetupStruct, sEGMent=SEGMent.Default) → None[source]
# SCPI: CONFigure:NRSub:MEASurement<Instance>:LIST:SEGMent<no>:SETup
structure = driver.configure.nrSubMeas.listPy.segment.setup.SetupStruct()
structure.Segment_Length: int = 1
structure.Level: float = 1.0
structure.Duplex_Mode: enums.DuplexModeB = enums.DuplexModeB.FDD
structure.Band: enums.Band = enums.Band.OB1
structure.Retrigger_Flag: enums.RetriggerFlag = enums.RetriggerFlag.IFPNarrowband
structure.Evaluat_Offset: int = 1
structure.Network_Sig_Val: enums.NetworkSigVal = enums.NetworkSigVal.NS01
driver.configure.nrSubMeas.listPy.segment.setup.set(structure, sEGMent = repcap.SEGMent.Default)

Defines the length and analyzer settings of segment <no>. For carrier-specific settings, there are additional commands. This command and the other segment configuration commands must be sent for all segments to be measured (method RsCmwNrFr1Meas.Configure.NrSubMeas.MultiEval.ListPy.Lrange.set) .

param structure:

for set value, see the help for SetupStruct structure arguments.

param sEGMent:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Segment’)