Cbandwidth<ChannelBwExt>

RepCap Settings

# Range: Bw5 .. Bw100
rc = driver.configure.nrSubMeas.multiEval.limit.aclr.utra.cbandwidth.repcap_channelBwExt_get()
driver.configure.nrSubMeas.multiEval.limit.aclr.utra.cbandwidth.repcap_channelBwExt_set(repcap.ChannelBwExt.Bw5)

SCPI Command :

CONFigure:NRSub:MEASurement<Instance>:MEValuation:LIMit:ACLR:UTRA<no>:CBANdwidth<bw>

class CbandwidthCls

Cbandwidth commands group definition. 1 total commands, 0 Subgroups, 1 group commands Repeated Capability: ChannelBwExt, default value after init: ChannelBwExt.Bw5

class CbandwidthStruct

Response structure. Fields:

• Relative_Level: float or bool: numeric | ON | OFF Relative lower ACLR limit without test tolerance Range: -256 dB to 256 dB, Unit: dB ON | OFF enables or disables the limit check.

• Absolute_Level: float or bool: numeric | ON | OFF Range: -256 dBm to 256 dBm, Unit: dBm ON | OFF enables or disables the limit check.

get(utraChannel=UtraChannel.Default, channelBwExt=ChannelBwExt.Default) → CbandwidthStruct

# SCPI: CONFigure:NRSub:MEASurement<Instance>:MEValuation:LIMit:ACLR:UTRA<no>:CBANdwidth<bw>
value: CbandwidthStruct = driver.configure.nrSubMeas.multiEval.limit.aclr.utra.cbandwidth.get(utraChannel = repcap.UtraChannel.Default, channelBwExt = repcap.ChannelBwExt.Default)

Defines relative and absolute limits for the ACLR measured in the first or second adjacent UTRA channel, depending on UTRA<no> (for NR SA without CA) . The settings are defined separately for each channel bandwidth.

param utraChannel:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Utra’)

param channelBwExt:

optional repeated capability selector. Default value: Bw5 (settable in the interface ‘Cbandwidth’)

return:

structure: for return value, see the help for CbandwidthStruct structure arguments.

set(relative_level: float, absolute_level: float, utraChannel=UtraChannel.Default, channelBwExt=ChannelBwExt.Default) → None

# SCPI: CONFigure:NRSub:MEASurement<Instance>:MEValuation:LIMit:ACLR:UTRA<no>:CBANdwidth<bw>
driver.configure.nrSubMeas.multiEval.limit.aclr.utra.cbandwidth.set(relative_level = 1.0, absolute_level = 1.0, utraChannel = repcap.UtraChannel.Default, channelBwExt = repcap.ChannelBwExt.Default)

Defines relative and absolute limits for the ACLR measured in the first or second adjacent UTRA channel, depending on UTRA<no> (for NR SA without CA) . The settings are defined separately for each channel bandwidth.

param relative_level:

(float or boolean) numeric | ON | OFF Relative lower ACLR limit without test tolerance Range: -256 dB to 256 dB, Unit: dB ON | OFF enables or disables the limit check.

param absolute_level:

(float or boolean) numeric | ON | OFF Range: -256 dBm to 256 dBm, Unit: dBm ON | OFF enables or disables the limit check.

param utraChannel:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Utra’)

param channelBwExt:

optional repeated capability selector. Default value: Bw5 (settable in the interface ‘Cbandwidth’)

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.configure.nrSubMeas.multiEval.limit.aclr.utra.cbandwidth.clone()