Average

SCPI Commands :

FETCh:NRSub:MEASurement<Instance>:MEValuation:LIST:SEGMent<nr>:SEMask:AVERage
CALCulate:NRSub:MEASurement<Instance>:MEValuation:LIST:SEGMent<nr>:SEMask:AVERage
class AverageCls[source]

Average commands group definition. 2 total commands, 0 Subgroups, 2 group commands

class CalculateStruct[source]

Response structure. Fields:

  • Reliability: int: decimal ‘Reliability indicator’

  • Seg_Reliability: int: decimal Reliability indicator for the segment

  • Statist_Expired: int: decimal Reached statistical length in slots

  • Out_Of_Tolerance: int: decimal Percentage of measured subframes with failed limit check Unit: %

  • Obw: float or bool: float Occupied bandwidth Unit: Hz

  • Tx_Power: float or bool: float Total TX power in the slot Unit: dBm

class FetchStruct[source]

Response structure. Fields:

  • Reliability: int: decimal ‘Reliability indicator’

  • Seg_Reliability: int: decimal Reliability indicator for the segment

  • Statist_Expired: int: decimal Reached statistical length in slots

  • Out_Of_Tolerance: int: decimal Percentage of measured subframes with failed limit check Unit: %

  • Obw: float: float Occupied bandwidth Unit: Hz

  • Tx_Power: float: float Total TX power in the slot Unit: dBm

calculate(sEGMent=SEGMent.Default) → CalculateStruct[source]
# SCPI: CALCulate:NRSub:MEASurement<Instance>:MEValuation:LIST:SEGMent<nr>:SEMask:AVERage
value: CalculateStruct = driver.nrSubMeas.multiEval.listPy.segment.seMask.average.calculate(sEGMent = repcap.SEGMent.Default)

Return spectrum emission single value results for segment <no> in list mode. The values described below are returned by FETCh commands. The first four values (reliability to out of tolerance result) are also returned by CALCulate commands. The remaining values returned by CALCulate commands are limit check results, one value for each result listed below.

param sEGMent:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Segment’)

return:

structure: for return value, see the help for CalculateStruct structure arguments.

fetch(sEGMent=SEGMent.Default) → FetchStruct[source]
# SCPI: FETCh:NRSub:MEASurement<Instance>:MEValuation:LIST:SEGMent<nr>:SEMask:AVERage
value: FetchStruct = driver.nrSubMeas.multiEval.listPy.segment.seMask.average.fetch(sEGMent = repcap.SEGMent.Default)

Return spectrum emission single value results for segment <no> in list mode. The values described below are returned by FETCh commands. The first four values (reliability to out of tolerance result) are also returned by CALCulate commands. The remaining values returned by CALCulate commands are limit check results, one value for each result listed below.

param sEGMent:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Segment’)

return:

structure: for return value, see the help for FetchStruct structure arguments.