StandardDev

SCPI Commands :

READ:NRSub:MEASurement<Instance>:MEValuation[:CC<no>]:MODulation:SDEViation
FETCh:NRSub:MEASurement<Instance>:MEValuation[:CC<no>]:MODulation:SDEViation
class StandardDevCls[source]

StandardDev commands group definition. 2 total commands, 0 Subgroups, 2 group commands

class ResultData[source]

Response structure. Fields:

  • Reliability: int: decimal ‘Reliability indicator’

  • Out_Of_Tolerance: int: decimal Out of tolerance result, i.e. percentage of measurement intervals of the statistic count for modulation measurements exceeding the specified modulation limits. Unit: %

  • Evm_Rms_Low: float: float EVM RMS value, low EVM window position Unit: %

  • Evm_Rms_High: float: float EVM RMS value, high EVM window position Unit: %

  • Evm_Peak_Low: float: float EVM peak value, low EVM window position Unit: %

  • Evm_Peak_High: float: float EVM peak value, high EVM window position Unit: %

  • Mag_Error_Rms_Low: float: float Magnitude error RMS value, low EVM window position Unit: %

  • Mag_Error_Rms_High: float: float Magnitude error RMS value, low EVM window position Unit: %

  • Mag_Error_Peak_Low: float: float Magnitude error peak value, low EVM window position Unit: %

  • Mag_Err_Peak_High: float: float Magnitude error peak value, high EVM window position Unit: %

  • Ph_Error_Rms_Low: float: float Phase error RMS value, low EVM window position Unit: deg

  • Ph_Error_Rms_High: float: float Phase error RMS value, high EVM window position Unit: deg

  • Ph_Error_Peak_Low: float: float Phase error peak value, low EVM window position Unit: deg

  • Ph_Error_Peak_High: float: float Phase error peak value, high EVM window position Unit: deg

  • Iq_Offset: float: float I/Q origin offset Unit: dBc

  • Frequency_Error: float: float Carrier frequency error Unit: Hz

  • Timing_Error: float: float Time error Unit: Ts (basic time unit)

  • Tx_Power: float: float User equipment power Unit: dBm

  • Peak_Power: float: float User equipment peak power Unit: dBm

  • Psd: float: No parameter help available

  • Evm_Dmrs_Low: float: float EVM DMRS value, low EVM window position Unit: %

  • Evm_Dmrs_High: float: float EVM DMRS value, high EVM window position Unit: %

  • Mag_Err_Dmrs_Low: float: float Magnitude error DMRS value, low EVM window position Unit: %

  • Mag_Err_Dmrs_High: float: float Magnitude error DMRS value, high EVM window position Unit: %

  • Ph_Error_Dmrs_Low: float: float Phase error DMRS value, low EVM window position Unit: deg

  • Ph_Error_Dmrs_High: float: float Phase error DMRS value, high EVM window position Unit: deg

  • Freq_Error_Ppm: float: float Carrier frequency error in ppm Unit: ppm

  • Sample_Clock_Err: float: No parameter help available

fetch(carrierComponent=CarrierComponent.Default) → ResultData[source]
# SCPI: FETCh:NRSub:MEASurement<Instance>:MEValuation[:CC<no>]:MODulation:SDEViation
value: ResultData = driver.nrSubMeas.multiEval.cc.modulation.standardDev.fetch(carrierComponent = repcap.CarrierComponent.Default)

Return the current, average and standard deviation single-value results for carrier <no>. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

param carrierComponent:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Cc’)

return:

structure: for return value, see the help for ResultData structure arguments.

read(carrierComponent=CarrierComponent.Default) → ResultData[source]
# SCPI: READ:NRSub:MEASurement<Instance>:MEValuation[:CC<no>]:MODulation:SDEViation
value: ResultData = driver.nrSubMeas.multiEval.cc.modulation.standardDev.read(carrierComponent = repcap.CarrierComponent.Default)

Return the current, average and standard deviation single-value results for carrier <no>. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

param carrierComponent:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Cc’)

return:

structure: for return value, see the help for ResultData structure arguments.